RedGage

If you use your laptop for a lot of processor-intensive activities such as gaming, or your programs tend to crash a lot, then you need a laptop cooling pad. With a few simple materials, you can create your own custom cooling pad to keep your computer cool and safe!

1. Measure your laptop's length and width and write it down . This will be important for the next step.
   
   
2. 2
   Buy a piece of plywood or other wood slightly larger than your laptop's dimensions . Add about 2 centimeters (0.75 inches) on each side for extra space. The wood should be around 1.25 centimeters (0.5 inches) thick.
3. 3
   Measure the wood and cut it to size, if necessary .
4. 4
   Drill holes about 2 centimeters (0 .75 inches) apart in a grid pattern on the board. You should be able to fit a pencil through the holes, but not much more. If you have serious overheating problems, drill the holes closer together.
5. 5
   Sand off the rough edges to prevent splinters .
6. 6
   Vacuum lightly over the board . This will prevent any wood particles from getting sucked into your computer by the fan.
7. 7
   Customize your cooling pad by painting it any way you want . If you aren't very artistic, get a paint that complements your laptop. If the wood is nice enough (not particleboard), you could use a nice wood stain.
8. 8
   If your laptop does not have 'feet' under it (pads that raise it up), glue on something to raise the laptop a bit . This is important for air circulation.